// Copyright 2014 The Flutter Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

import 'dart:math';
import 'dart:ui' show lerpDouble, ImageFilter;

import 'package:flutter/foundation.dart';
import 'package:flutter/gestures.dart';
import 'package:flutter/rendering.dart';
import 'package:flutter/widgets.dart';

import 'colors.dart';
import 'interface_level.dart';
import 'localizations.dart';

const double _kBackGestureWidth = 20.0;
const double _kMinFlingVelocity = 1.0; // Screen widths per second.

// An eyeballed value for the maximum time it takes for a page to animate forward
// if the user releases a page mid swipe.
const int _kMaxDroppedSwipePageForwardAnimationTime = 800; // Milliseconds.

// The maximum time for a page to get reset to it's original position if the
// user releases a page mid swipe.
const int _kMaxPageBackAnimationTime = 300; // Milliseconds.

/// Barrier color for a Cupertino modal barrier.
///
/// Extracted from https://developer.apple.com/design/resources/.
const Color kCupertinoModalBarrierColor = CupertinoDynamicColor.withBrightness(
  color: Color(0x33000000),
  darkColor: Color(0x7A000000),
);

// The duration of the transition used when a modal popup is shown.
const Duration _kModalPopupTransitionDuration = Duration(milliseconds: 335);

// Offset from offscreen to the right to fully on screen.
final Animatable<Offset> _kRightMiddleTween = Tween<Offset>(
  begin: const Offset(1.0, 0.0),
  end: Offset.zero,
);

// Offset from fully on screen to 1/3 offscreen to the left.
final Animatable<Offset> _kMiddleLeftTween = Tween<Offset>(
  begin: Offset.zero,
  end: const Offset(-1.0/3.0, 0.0),
);

// Offset from offscreen below to fully on screen.
final Animatable<Offset> _kBottomUpTween = Tween<Offset>(
  begin: const Offset(0.0, 1.0),
  end: Offset.zero,
);

/// A mixin that replaces the entire screen with an iOS transition for a
/// [PageRoute].
///
/// {@template flutter.cupertino.cupertinoRouteTransitionMixin}
/// The page slides in from the right and exits in reverse. The page also shifts
/// to the left in parallax when another page enters to cover it.
///
/// The page slides in from the bottom and exits in reverse with no parallax
/// effect for fullscreen dialogs.
/// {@endtemplate}
///
/// See also:
///
///  * [MaterialRouteTransitionMixin], which is a mixin that provides
///    platform-appropriate transitions for a [PageRoute].
///  * [CupertinoPageRoute], which is a [PageRoute] that leverages this mixin.
mixin CupertinoRouteTransitionMixin<T> on PageRoute<T> {
  /// Builds the primary contents of the route.
  @protected
  Widget buildContent(BuildContext context);

  /// {@template flutter.cupertino.CupertinoRouteTransitionMixin.title}
  /// A title string for this route.
  ///
  /// Used to auto-populate [CupertinoNavigationBar] and
  /// [CupertinoSliverNavigationBar]'s `middle`/`largeTitle` widgets when
  /// one is not manually supplied.
  /// {@endtemplate}
  String? get title;

  ValueNotifier<String?>? _previousTitle;

  /// The title string of the previous [CupertinoPageRoute].
  ///
  /// The [ValueListenable]'s value is readable after the route is installed
  /// onto a [Navigator]. The [ValueListenable] will also notify its listeners
  /// if the value changes (such as by replacing the previous route).
  ///
  /// The [ValueListenable] itself will be null before the route is installed.
  /// Its content value will be null if the previous route has no title or
  /// is not a [CupertinoPageRoute].
  ///
  /// See also:
  ///
  ///  * [ValueListenableBuilder], which can be used to listen and rebuild
  ///    widgets based on a ValueListenable.
  ValueListenable<String?> get previousTitle {
    assert(
      _previousTitle != null,
      'Cannot read the previousTitle for a route that has not yet been installed',
    );
    return _previousTitle!;
  }

  @override
  void didChangePrevious(Route<dynamic>? previousRoute) {
    final String? previousTitleString = previousRoute is CupertinoRouteTransitionMixin
      ? previousRoute.title
      : null;
    if (_previousTitle == null) {
      _previousTitle = ValueNotifier<String?>(previousTitleString);
    } else {
      _previousTitle!.value = previousTitleString;
    }
    super.didChangePrevious(previousRoute);
  }

  @override
  // A relatively rigorous eyeball estimation.
  Duration get transitionDuration => const Duration(milliseconds: 400);

  @override
  Color? get barrierColor => null;

  @override
  String? get barrierLabel => null;

  @override
  bool canTransitionTo(TransitionRoute<dynamic> nextRoute) {
    // Don't perform outgoing animation if the next route is a fullscreen dialog.
    return nextRoute is CupertinoRouteTransitionMixin && !nextRoute.fullscreenDialog;
  }

  /// True if an iOS-style back swipe pop gesture is currently underway for [route].
  ///
  /// This just check the route's [NavigatorState.userGestureInProgress].
  ///
  /// See also:
  ///
  ///  * [popGestureEnabled], which returns true if a user-triggered pop gesture
  ///    would be allowed.
  static bool isPopGestureInProgress(PageRoute<dynamic> route) {
    return route.navigator!.userGestureInProgress;
  }

  /// True if an iOS-style back swipe pop gesture is currently underway for this route.
  ///
  /// See also:
  ///
  ///  * [isPopGestureInProgress], which returns true if a Cupertino pop gesture
  ///    is currently underway for specific route.
  ///  * [popGestureEnabled], which returns true if a user-triggered pop gesture
  ///    would be allowed.
  bool get popGestureInProgress => isPopGestureInProgress(this);

  /// Whether a pop gesture can be started by the user.
  ///
  /// Returns true if the user can edge-swipe to a previous route.
  ///
  /// Returns false once [isPopGestureInProgress] is true, but
  /// [isPopGestureInProgress] can only become true if [popGestureEnabled] was
  /// true first.
  ///
  /// This should only be used between frames, not during build.
  bool get popGestureEnabled => _isPopGestureEnabled(this);

  static bool _isPopGestureEnabled<T>(PageRoute<T> route) {
    // If there's nothing to go back to, then obviously we don't support
    // the back gesture.
    if (route.isFirst)
      return false;
    // If the route wouldn't actually pop if we popped it, then the gesture
    // would be really confusing (or would skip internal routes), so disallow it.
    if (route.willHandlePopInternally)
      return false;
    // If attempts to dismiss this route might be vetoed such as in a page
    // with forms, then do not allow the user to dismiss the route with a swipe.
    if (route.hasScopedWillPopCallback)
      return false;
    // Fullscreen dialogs aren't dismissible by back swipe.
    if (route.fullscreenDialog)
      return false;
    // If we're in an animation already, we cannot be manually swiped.
    if (route.animation!.status != AnimationStatus.completed)
      return false;
    // If we're being popped into, we also cannot be swiped until the pop above
    // it completes. This translates to our secondary animation being
    // dismissed.
    if (route.secondaryAnimation!.status != AnimationStatus.dismissed)
      return false;
    // If we're in a gesture already, we cannot start another.
    if (isPopGestureInProgress(route))
      return false;

    // Looks like a back gesture would be welcome!
    return true;
  }

  @override
  Widget buildPage(BuildContext context, Animation<double> animation, Animation<double> secondaryAnimation) {
    final Widget child = buildContent(context);
    final Widget result = Semantics(
      scopesRoute: true,
      explicitChildNodes: true,
      child: child,
    );
    assert(() {
      // `child` has a non-nullable return type, but might be null when
      // running with weak checking, so we need to null check it anyway (and
      // ignore the warning that the null-handling logic is dead code).
      if (child == null) { // ignore: dead_code
        throw FlutterError.fromParts(<DiagnosticsNode>[
          ErrorSummary('The builder for route "${settings.name}" returned null.'),
          ErrorDescription('Route builders must never return null.'),
        ]);
      }
      return true;
    }());
    return result;
  }

  // Called by _CupertinoBackGestureDetector when a pop ("back") drag start
  // gesture is detected. The returned controller handles all of the subsequent
  // drag events.
  static _CupertinoBackGestureController<T> _startPopGesture<T>(PageRoute<T> route) {
    assert(_isPopGestureEnabled(route));

    return _CupertinoBackGestureController<T>(
      navigator: route.navigator!,
      controller: route.controller!, // protected access
    );
  }

  /// Returns a [CupertinoFullscreenDialogTransition] if [route] is a full
  /// screen dialog, otherwise a [CupertinoPageTransition] is returned.
  ///
  /// Used by [CupertinoPageRoute.buildTransitions].
  ///
  /// This method can be applied to any [PageRoute], not just
  /// [CupertinoPageRoute]. It's typically used to provide a Cupertino style
  /// horizontal transition for material widgets when the target platform
  /// is [TargetPlatform.iOS].
  ///
  /// See also:
  ///
  ///  * [CupertinoPageTransitionsBuilder], which uses this method to define a
  ///    [PageTransitionsBuilder] for the [PageTransitionsTheme].
  static Widget buildPageTransitions<T>(
    PageRoute<T> route,
    BuildContext context,
    Animation<double> animation,
    Animation<double> secondaryAnimation,
    Widget child,
  ) {
    // Check if the route has an animation that's currently participating
    // in a back swipe gesture.
    //
    // In the middle of a back gesture drag, let the transition be linear to
    // match finger motions.
    final bool linearTransition = isPopGestureInProgress(route);
    if (route.fullscreenDialog) {
      return CupertinoFullscreenDialogTransition(
        primaryRouteAnimation: animation,
        secondaryRouteAnimation: secondaryAnimation,
        child: child,
        linearTransition: linearTransition,
      );
    } else {
      return CupertinoPageTransition(
        primaryRouteAnimation: animation,
        secondaryRouteAnimation: secondaryAnimation,
        linearTransition: linearTransition,
        child: _CupertinoBackGestureDetector<T>(
          enabledCallback: () => _isPopGestureEnabled<T>(route),
          onStartPopGesture: () => _startPopGesture<T>(route),
          child: child,
        ),
      );
    }
  }

  @override
  Widget buildTransitions(BuildContext context, Animation<double> animation, Animation<double> secondaryAnimation, Widget child) {
    return buildPageTransitions<T>(this, context, animation, secondaryAnimation, child);
  }
}

/// A modal route that replaces the entire screen with an iOS transition.
///
/// {@macro flutter.cupertino.cupertinoRouteTransitionMixin}
///
/// By default, when a modal route is replaced by another, the previous route
/// remains in memory. To free all the resources when this is not necessary, set
/// [maintainState] to false.
///
/// The type `T` specifies the return type of the route which can be supplied as
/// the route is popped from the stack via [Navigator.pop] when an optional
/// `result` can be provided.
///
/// See also:
///
///  * [CupertinoRouteTransitionMixin], for a mixin that provides iOS transition
///    for this modal route.
///  * [MaterialPageRoute], for an adaptive [PageRoute] that uses a
///    platform-appropriate transition.
///  * [CupertinoPageScaffold], for applications that have one page with a fixed
///    navigation bar on top.
///  * [CupertinoTabScaffold], for applications that have a tab bar at the
///    bottom with multiple pages.
///  * [CupertinoPage], for a [Page] version of this class.
class CupertinoPageRoute<T> extends PageRoute<T> with CupertinoRouteTransitionMixin<T> {
  /// Creates a page route for use in an iOS designed app.
  ///
  /// The [builder], [maintainState], and [fullscreenDialog] arguments must not
  /// be null.
  CupertinoPageRoute({
    required this.builder,
    this.title,
    RouteSettings? settings,
    this.maintainState = true,
    bool fullscreenDialog = false,
  }) : assert(builder != null),
       assert(maintainState != null),
       assert(fullscreenDialog != null),
       super(settings: settings, fullscreenDialog: fullscreenDialog) {
    assert(opaque);
  }

  /// Builds the primary contents of the route.
  final WidgetBuilder builder;

  @override
  Widget buildContent(BuildContext context) => builder(context);

  @override
  final String? title;

  @override
  final bool maintainState;

  @override
  String get debugLabel => '${super.debugLabel}(${settings.name})';
}

// A page-based version of CupertinoPageRoute.
//
// This route uses the builder from the page to build its content. This ensures
// the content is up to date after page updates.
class _PageBasedCupertinoPageRoute<T> extends PageRoute<T> with CupertinoRouteTransitionMixin<T> {
  _PageBasedCupertinoPageRoute({
    required CupertinoPage<T> page,
  }) : assert(page != null),
       super(settings: page) {
    assert(opaque);
  }

  CupertinoPage<T> get _page => settings as CupertinoPage<T>;

  @override
  Widget buildContent(BuildContext context) => _page.child;

  @override
  String? get title => _page.title;

  @override
  bool get maintainState => _page.maintainState;

  @override
  bool get fullscreenDialog => _page.fullscreenDialog;

  @override
  String get debugLabel => '${super.debugLabel}(${_page.name})';
}

/// A page that creates a cupertino style [PageRoute].
///
/// {@macro flutter.cupertino.cupertinoRouteTransitionMixin}
///
/// By default, when a created modal route is replaced by another, the previous
/// route remains in memory. To free all the resources when this is not
/// necessary, set [maintainState] to false.
///
/// The type `T` specifies the return type of the route which can be supplied as
/// the route is popped from the stack via [Navigator.transitionDelegate] by
/// providing the optional `result` argument to the
/// [RouteTransitionRecord.markForPop] in the [TransitionDelegate.resolve].
///
/// See also:
///
///  * [CupertinoPageRoute], for a [PageRoute] version of this class.
class CupertinoPage<T> extends Page<T> {
  /// Creates a cupertino page.
  const CupertinoPage({
    required this.child,
    this.maintainState = true,
    this.title,
    this.fullscreenDialog = false,
    LocalKey? key,
    String? name,
    Object? arguments,
  }) : assert(child != null),
       assert(maintainState != null),
       assert(fullscreenDialog != null),
       super(key: key, name: name, arguments: arguments);

  /// The content to be shown in the [Route] created by this page.
  final Widget child;

  /// {@macro flutter.cupertino.CupertinoRouteTransitionMixin.title}
  final String? title;

  /// {@macro flutter.widgets.ModalRoute.maintainState}
  final bool maintainState;

  /// {@macro flutter.widgets.PageRoute.fullscreenDialog}
  final bool fullscreenDialog;

  @override
  Route<T> createRoute(BuildContext context) {
    return _PageBasedCupertinoPageRoute<T>(page: this);
  }
}

/// Provides an iOS-style page transition animation.
///
/// The page slides in from the right and exits in reverse. It also shifts to the left in
/// a parallax motion when another page enters to cover it.
class CupertinoPageTransition extends StatelessWidget {
  /// Creates an iOS-style page transition.
  ///
  ///  * `primaryRouteAnimation` is a linear route animation from 0.0 to 1.0
  ///    when this screen is being pushed.
  ///  * `secondaryRouteAnimation` is a linear route animation from 0.0 to 1.0
  ///    when another screen is being pushed on top of this one.
  ///  * `linearTransition` is whether to perform the transitions linearly.
  ///    Used to precisely track back gesture drags.
  CupertinoPageTransition({
    Key? key,
    required Animation<double> primaryRouteAnimation,
    required Animation<double> secondaryRouteAnimation,
    required this.child,
    required bool linearTransition,
  }) : assert(linearTransition != null),
       _primaryPositionAnimation =
           (linearTransition
             ? primaryRouteAnimation
             : CurvedAnimation(
                 // The curves below have been rigorously derived from plots of native
                 // iOS animation frames. Specifically, a video was taken of a page
                 // transition animation and the distance in each frame that the page
                 // moved was measured. A best fit bezier curve was the fitted to the
                 // point set, which is linearToEaseIn. Conversely, easeInToLinear is the
                 // reflection over the origin of linearToEaseIn.
                 parent: primaryRouteAnimation,
                 curve: Curves.linearToEaseOut,
                 reverseCurve: Curves.easeInToLinear,
               )
           ).drive(_kRightMiddleTween),
       _secondaryPositionAnimation =
           (linearTransition
             ? secondaryRouteAnimation
             : CurvedAnimation(
                 parent: secondaryRouteAnimation,
                 curve: Curves.linearToEaseOut,
                 reverseCurve: Curves.easeInToLinear,
               )
           ).drive(_kMiddleLeftTween),
       _primaryShadowAnimation =
           (linearTransition
             ? primaryRouteAnimation
             : CurvedAnimation(
                 parent: primaryRouteAnimation,
                 curve: Curves.linearToEaseOut,
               )
           ).drive(_CupertinoEdgeShadowDecoration.kTween),
       super(key: key);

  // When this page is coming in to cover another page.
  final Animation<Offset> _primaryPositionAnimation;
  // When this page is becoming covered by another page.
  final Animation<Offset> _secondaryPositionAnimation;
  final Animation<Decoration> _primaryShadowAnimation;

  /// The widget below this widget in the tree.
  final Widget child;

  @override
  Widget build(BuildContext context) {
    assert(debugCheckHasDirectionality(context));
    final TextDirection textDirection = Directionality.of(context);
    return SlideTransition(
      position: _secondaryPositionAnimation,
      textDirection: textDirection,
      transformHitTests: false,
      child: SlideTransition(
        position: _primaryPositionAnimation,
        textDirection: textDirection,
        child: DecoratedBoxTransition(
          decoration: _primaryShadowAnimation,
          child: child,
        ),
      ),
    );
  }
}

/// An iOS-style transition used for summoning fullscreen dialogs.
///
/// For example, used when creating a new calendar event by bringing in the next
/// screen from the bottom.
class CupertinoFullscreenDialogTransition extends StatelessWidget {
  /// Creates an iOS-style transition used for summoning fullscreen dialogs.
  ///
  ///  * `primaryRouteAnimation` is a linear route animation from 0.0 to 1.0
  ///    when this screen is being pushed.
  ///  * `secondaryRouteAnimation` is a linear route animation from 0.0 to 1.0
  ///    when another screen is being pushed on top of this one.
  ///  * `linearTransition` is whether to perform the secondary transition linearly.
  ///    Used to precisely track back gesture drags.
  CupertinoFullscreenDialogTransition({
    Key? key,
    required Animation<double> primaryRouteAnimation,
    required Animation<double> secondaryRouteAnimation,
    required this.child,
    required bool linearTransition,
  }) : _positionAnimation = CurvedAnimation(
         parent: primaryRouteAnimation,
         curve: Curves.linearToEaseOut,
         // The curve must be flipped so that the reverse animation doesn't play
         // an ease-in curve, which iOS does not use.
         reverseCurve: Curves.linearToEaseOut.flipped,
       ).drive(_kBottomUpTween),
       _secondaryPositionAnimation =
           (linearTransition
             ? secondaryRouteAnimation
             : CurvedAnimation(
                 parent: secondaryRouteAnimation,
                 curve: Curves.linearToEaseOut,
                 reverseCurve: Curves.easeInToLinear,
               )
           ).drive(_kMiddleLeftTween),
       super(key: key);

  final Animation<Offset> _positionAnimation;
  // When this page is becoming covered by another page.
  final Animation<Offset> _secondaryPositionAnimation;

  /// The widget below this widget in the tree.
  final Widget child;

  @override
  Widget build(BuildContext context) {
    assert(debugCheckHasDirectionality(context));
    final TextDirection textDirection = Directionality.of(context);
    return SlideTransition(
      position: _secondaryPositionAnimation,
      textDirection: textDirection,
      transformHitTests: false,
      child: SlideTransition(
        position: _positionAnimation,
        child: child,
      ),
    );
  }
}

/// This is the widget side of [_CupertinoBackGestureController].
///
/// This widget provides a gesture recognizer which, when it determines the
/// route can be closed with a back gesture, creates the controller and
/// feeds it the input from the gesture recognizer.
///
/// The gesture data is converted from absolute coordinates to logical
/// coordinates by this widget.
///
/// The type `T` specifies the return type of the route with which this gesture
/// detector is associated.
class _CupertinoBackGestureDetector<T> extends StatefulWidget {
  const _CupertinoBackGestureDetector({
    Key? key,
    required this.enabledCallback,
    required this.onStartPopGesture,
    required this.child,
  }) : assert(enabledCallback != null),
       assert(onStartPopGesture != null),
       assert(child != null),
       super(key: key);

  final Widget child;

  final ValueGetter<bool> enabledCallback;

  final ValueGetter<_CupertinoBackGestureController<T>> onStartPopGesture;

  @override
  _CupertinoBackGestureDetectorState<T> createState() => _CupertinoBackGestureDetectorState<T>();
}

class _CupertinoBackGestureDetectorState<T> extends State<_CupertinoBackGestureDetector<T>> {
  _CupertinoBackGestureController<T>? _backGestureController;

  late HorizontalDragGestureRecognizer _recognizer;

  @override
  void initState() {
    super.initState();
    _recognizer = HorizontalDragGestureRecognizer(debugOwner: this)
      ..onStart = _handleDragStart
      ..onUpdate = _handleDragUpdate
      ..onEnd = _handleDragEnd
      ..onCancel = _handleDragCancel;
  }

  @override
  void dispose() {
    _recognizer.dispose();
    super.dispose();
  }

  void _handleDragStart(DragStartDetails details) {
    assert(mounted);
    assert(_backGestureController == null);
    _backGestureController = widget.onStartPopGesture();
  }

  void _handleDragUpdate(DragUpdateDetails details) {
    assert(mounted);
    assert(_backGestureController != null);
    _backGestureController!.dragUpdate(_convertToLogical(details.primaryDelta! / context.size!.width));
  }

  void _handleDragEnd(DragEndDetails details) {
    assert(mounted);
    assert(_backGestureController != null);
    _backGestureController!.dragEnd(_convertToLogical(details.velocity.pixelsPerSecond.dx / context.size!.width));
    _backGestureController = null;
  }

  void _handleDragCancel() {
    assert(mounted);
    // This can be called even if start is not called, paired with the "down" event
    // that we don't consider here.
    _backGestureController?.dragEnd(0.0);
    _backGestureController = null;
  }

  void _handlePointerDown(PointerDownEvent event) {
    if (widget.enabledCallback())
      _recognizer.addPointer(event);
  }

  double _convertToLogical(double value) {
    switch (Directionality.of(context)) {
      case TextDirection.rtl:
        return -value;
      case TextDirection.ltr:
        return value;
    }
  }

  @override
  Widget build(BuildContext context) {
    assert(debugCheckHasDirectionality(context));
    // For devices with notches, the drag area needs to be larger on the side
    // that has the notch.
    double dragAreaWidth = Directionality.of(context) == TextDirection.ltr ?
                           MediaQuery.of(context).padding.left :
                           MediaQuery.of(context).padding.right;
    dragAreaWidth = max(dragAreaWidth, _kBackGestureWidth);
    return Stack(
      fit: StackFit.passthrough,
      children: <Widget>[
        widget.child,
        PositionedDirectional(
          start: 0.0,
          width: dragAreaWidth,
          top: 0.0,
          bottom: 0.0,
          child: Listener(
            onPointerDown: _handlePointerDown,
            behavior: HitTestBehavior.translucent,
          ),
        ),
      ],
    );
  }
}

/// A controller for an iOS-style back gesture.
///
/// This is created by a [CupertinoPageRoute] in response from a gesture caught
/// by a [_CupertinoBackGestureDetector] widget, which then also feeds it input
/// from the gesture. It controls the animation controller owned by the route,
/// based on the input provided by the gesture detector.
///
/// This class works entirely in logical coordinates (0.0 is new page dismissed,
/// 1.0 is new page on top).
///
/// The type `T` specifies the return type of the route with which this gesture
/// detector controller is associated.
class _CupertinoBackGestureController<T> {
  /// Creates a controller for an iOS-style back gesture.
  ///
  /// The [navigator] and [controller] arguments must not be null.
  _CupertinoBackGestureController({
    required this.navigator,
    required this.controller,
  }) : assert(navigator != null),
       assert(controller != null) {
    navigator.didStartUserGesture();
  }

  final AnimationController controller;
  final NavigatorState navigator;

  /// The drag gesture has changed by [fractionalDelta]. The total range of the
  /// drag should be 0.0 to 1.0.
  void dragUpdate(double delta) {
    controller.value -= delta;
  }

  /// The drag gesture has ended with a horizontal motion of
  /// [fractionalVelocity] as a fraction of screen width per second.
  void dragEnd(double velocity) {
    // Fling in the appropriate direction.
    // AnimationController.fling is guaranteed to
    // take at least one frame.
    //
    // This curve has been determined through rigorously eyeballing native iOS
    // animations.
    const Curve animationCurve = Curves.fastLinearToSlowEaseIn;
    final bool animateForward;

    // If the user releases the page before mid screen with sufficient velocity,
    // or after mid screen, we should animate the page out. Otherwise, the page
    // should be animated back in.
    if (velocity.abs() >= _kMinFlingVelocity)
      animateForward = velocity <= 0;
    else
      animateForward = controller.value > 0.5;

    if (animateForward) {
      // The closer the panel is to dismissing, the shorter the animation is.
      // We want to cap the animation time, but we want to use a linear curve
      // to determine it.
      final int droppedPageForwardAnimationTime = min(
        lerpDouble(_kMaxDroppedSwipePageForwardAnimationTime, 0, controller.value)!.floor(),
        _kMaxPageBackAnimationTime,
      );
      controller.animateTo(1.0, duration: Duration(milliseconds: droppedPageForwardAnimationTime), curve: animationCurve);
    } else {
      // This route is destined to pop at this point. Reuse navigator's pop.
      navigator.pop();

      // The popping may have finished inline if already at the target destination.
      if (controller.isAnimating) {
        // Otherwise, use a custom popping animation duration and curve.
        final int droppedPageBackAnimationTime = lerpDouble(0, _kMaxDroppedSwipePageForwardAnimationTime, controller.value)!.floor();
        controller.animateBack(0.0, duration: Duration(milliseconds: droppedPageBackAnimationTime), curve: animationCurve);
      }
    }

    if (controller.isAnimating) {
      // Keep the userGestureInProgress in true state so we don't change the
      // curve of the page transition mid-flight since CupertinoPageTransition
      // depends on userGestureInProgress.
      late AnimationStatusListener animationStatusCallback;
      animationStatusCallback = (AnimationStatus status) {
        navigator.didStopUserGesture();
        controller.removeStatusListener(animationStatusCallback);
      };
      controller.addStatusListener(animationStatusCallback);
    } else {
      navigator.didStopUserGesture();
    }
  }
}

// A custom [Decoration] used to paint an extra shadow on the start edge of the
// box it's decorating. It's like a [BoxDecoration] with only a gradient except
// it paints on the start side of the box instead of behind the box.
class _CupertinoEdgeShadowDecoration extends Decoration {
  const _CupertinoEdgeShadowDecoration._([this._colors]);

  static DecorationTween kTween = DecorationTween(
    begin: const _CupertinoEdgeShadowDecoration._(), // No decoration initially.
    end: const _CupertinoEdgeShadowDecoration._(
      // Eyeballed gradient used to mimic a drop shadow on the start side only.
      <Color>[
        Color(0x38000000),
        Color(0x12000000),
        Color(0x04000000),
        Color(0x00000000),
      ],
    ),
  );

  // Colors used to paint a gradient at the start edge of the box it is
  // decorating.
  //
  // The first color in the list is used at the start of the gradient, which
  // is located at the start edge of the decorated box.
  //
  // If this is null, no shadow is drawn.
  //
  // The list must have at least two colors in it (otherwise it would not be a
  // gradient).
  final List<Color>? _colors;

  // Linearly interpolate between two edge shadow decorations decorations.
  //
  // The `t` argument represents position on the timeline, with 0.0 meaning
  // that the interpolation has not started, returning `a` (or something
  // equivalent to `a`), 1.0 meaning that the interpolation has finished,
  // returning `b` (or something equivalent to `b`), and values in between
  // meaning that the interpolation is at the relevant point on the timeline
  // between `a` and `b`. The interpolation can be extrapolated beyond 0.0 and
  // 1.0, so negative values and values greater than 1.0 are valid (and can
  // easily be generated by curves such as [Curves.elasticInOut]).
  //
  // Values for `t` are usually obtained from an [Animation<double>], such as
  // an [AnimationController].
  //
  // See also:
  //
  //  * [Decoration.lerp].
  static _CupertinoEdgeShadowDecoration? lerp(
    _CupertinoEdgeShadowDecoration? a,
    _CupertinoEdgeShadowDecoration? b,
    double t,
  ) {
    assert(t != null);
    if (a == null && b == null)
      return null;
    if (a == null)
      return b!._colors == null ? b : _CupertinoEdgeShadowDecoration._(b._colors!.map<Color>((Color color) => Color.lerp(null, color, t)!).toList());
    if (b == null)
      return a._colors == null ? a : _CupertinoEdgeShadowDecoration._(a._colors!.map<Color>((Color color) => Color.lerp(null, color, 1.0 - t)!).toList());
    assert(b._colors != null || a._colors != null);
    // If it ever becomes necessary, we could allow decorations with different
    // length' here, similarly to how it is handled in [LinearGradient.lerp].
    assert(b._colors == null || a._colors == null || a._colors!.length == b._colors!.length);
    return _CupertinoEdgeShadowDecoration._(
      <Color>[
        for (int i = 0; i < b._colors!.length; i += 1)
          Color.lerp(a._colors?[i], b._colors?[i], t)!,
      ]
    );
  }

  @override
  _CupertinoEdgeShadowDecoration lerpFrom(Decoration? a, double t) {
    if (a is _CupertinoEdgeShadowDecoration)
      return _CupertinoEdgeShadowDecoration.lerp(a, this, t)!;
    return _CupertinoEdgeShadowDecoration.lerp(null, this, t)!;
  }

  @override
  _CupertinoEdgeShadowDecoration lerpTo(Decoration? b, double t) {
    if (b is _CupertinoEdgeShadowDecoration)
      return _CupertinoEdgeShadowDecoration.lerp(this, b, t)!;
    return _CupertinoEdgeShadowDecoration.lerp(this, null, t)!;
  }

  @override
  _CupertinoEdgeShadowPainter createBoxPainter([ VoidCallback? onChanged ]) {
    return _CupertinoEdgeShadowPainter(this, onChanged);
  }

  @override
  bool operator ==(Object other) {
    if (other.runtimeType != runtimeType)
      return false;
    return other is _CupertinoEdgeShadowDecoration
        && other._colors == _colors;
  }

  @override
  int get hashCode => _colors.hashCode;

  @override
  void debugFillProperties(DiagnosticPropertiesBuilder properties) {
    super.debugFillProperties(properties);
    properties.add(IterableProperty<Color>('colors', _colors));
  }
}

/// A [BoxPainter] used to draw the page transition shadow using gradients.
class _CupertinoEdgeShadowPainter extends BoxPainter {
  _CupertinoEdgeShadowPainter(
    this._decoration,
    VoidCallback? onChange,
  ) : assert(_decoration != null),
      assert(_decoration._colors == null || _decoration._colors!.length > 1),
      super(onChange);

  final _CupertinoEdgeShadowDecoration _decoration;

  @override
  void paint(Canvas canvas, Offset offset, ImageConfiguration configuration) {
    final List<Color>? colors = _decoration._colors;
    if (colors == null) {
      return;
    }

    // The following code simulates drawing a [LinearGradient] configured as
    // follows:
    //
    // LinearGradient(
    //   begin: AlignmentDirectional(0.90, 0.0), // Spans 5% of the page.
    //   colors: _decoration._colors,
    // )
    //
    // A performance evaluation on Feb 8, 2021 showed, that drawing the gradient
    // manually as implemented below is more performant than relying on
    // [LinearGradient.createShader] because compiling that shader takes a long
    // time. On an iPhone XR, the implementation below reduced the worst frame
    // time for a cupertino page transition of a newly installed app from ~95ms
    // down to ~30ms, mainly because there's no longer a need to compile a
    // shader for the LinearGradient.
    //
    // The implementation below divides the width of the shadow into multiple
    // bands of equal width, one for each color interval defined by
    // `_decoration._colors`. Band x is filled with a gradient going from
    // `_decoration._colors[x]` to `_decoration._colors[x + 1]` by drawing a
    // bunch of 1px wide rects. The rects change their color by lerping between
    // the two colors that define the interval of the band.

    // Shadow spans 5% of the page.
    final double shadowWidth = 0.05 * configuration.size!.width;
    final double shadowHeight = configuration.size!.height;
    final double bandWidth = shadowWidth / (colors.length - 1);

    final TextDirection? textDirection = configuration.textDirection;
    assert(textDirection != null);
    final double start;
    final double shadowDirection; // -1 for ltr, 1 for rtl.
    switch (textDirection!) {
      case TextDirection.rtl:
        start = offset.dx + configuration.size!.width;
        shadowDirection = 1;
        break;
      case TextDirection.ltr:
        start = offset.dx;
        shadowDirection = -1;
        break;
    }

    int bandColorIndex = 0;
    for (int dx = 0; dx < shadowWidth; dx += 1) {
      if (dx ~/ bandWidth != bandColorIndex) {
        bandColorIndex += 1;
      }
      final Paint paint = Paint()
        ..color = Color.lerp(colors[bandColorIndex], colors[bandColorIndex + 1], (dx % bandWidth) / bandWidth)!;
      final double x = start + shadowDirection * dx;
      canvas.drawRect(Rect.fromLTWH(x - 1.0, offset.dy, 1.0, shadowHeight), paint);
    }
  }
}

/// A route that shows a modal iOS-style popup that slides up from the
/// bottom of the screen.
///
/// Such a popup is an alternative to a menu or a dialog and prevents the user
/// from interacting with the rest of the app.
///
/// It is used internally by [showCupertinoModalPopup] or can be directly pushed
/// onto the [Navigator] stack to enable state restoration. See
/// [showCupertinoModalPopup] for a state restoration app example.
///
/// The `barrierColor` argument determines the [Color] of the barrier underneath
/// the popup. When unspecified, the barrier color defaults to a light opacity
/// black scrim based on iOS's dialog screens. To correctly have iOS resolve
/// to the appropriate modal colors, pass in
/// `CupertinoDynamicColor.resolve(kCupertinoModalBarrierColor, context)`.
///
/// The `barrierDismissible` argument determines whether clicking outside the
/// popup results in dismissal. It is `true` by default.
///
/// The `semanticsDismissible` argument is used to determine whether the
/// semantics of the modal barrier are included in the semantics tree.
///
/// The `routeSettings` argument is used to provide [RouteSettings] to the
/// created Route.
///
/// See also:
///
///  * [CupertinoActionSheet], which is the widget usually returned by the
///    `builder` argument.
///  * <https://developer.apple.com/design/human-interface-guidelines/ios/views/action-sheets/>
class CupertinoModalPopupRoute<T> extends PopupRoute<T> {
  /// A route that shows a modal iOS-style popup that slides up from the
  /// bottom of the screen.
  CupertinoModalPopupRoute({
    required this.builder,
    this.barrierLabel = 'Dismiss',
    this.barrierColor = kCupertinoModalBarrierColor,
    bool barrierDismissible = true,
    bool? semanticsDismissible,
    ImageFilter? filter,
    RouteSettings? settings,
  }) : super(
         filter: filter,
         settings: settings,
       ) {
    _barrierDismissible = barrierDismissible;
    _semanticsDismissible = semanticsDismissible;
  }

  /// A builder that builds the widget tree for the [CupertinoModalPopupRoute].
  ///
  /// The `builder` argument typically builds a [CupertinoActionSheet] widget.
  ///
  /// Content below the widget is dimmed with a [ModalBarrier]. The widget built
  /// by the `builder` does not share a context with the route it was originally
  /// built from. Use a [StatefulBuilder] or a custom [StatefulWidget] if the
  /// widget needs to update dynamically.
  final WidgetBuilder builder;

  bool? _barrierDismissible;

  bool? _semanticsDismissible;

  @override
  final String barrierLabel;

  @override
  final Color? barrierColor;

  @override
  bool get barrierDismissible => _barrierDismissible ?? true;

  @override
  bool get semanticsDismissible => _semanticsDismissible ?? false;

  @override
  Duration get transitionDuration => _kModalPopupTransitionDuration;

  Animation<double>? _animation;

  late Tween<Offset> _offsetTween;

  @override
  Animation<double> createAnimation() {
    assert(_animation == null);
    _animation = CurvedAnimation(
      parent: super.createAnimation(),

      // These curves were initially measured from native iOS horizontal page
      // route animations and seemed to be a good match here as well.
      curve: Curves.linearToEaseOut,
      reverseCurve: Curves.linearToEaseOut.flipped,
    );
    _offsetTween = Tween<Offset>(
      begin: const Offset(0.0, 1.0),
      end: Offset.zero,
    );
    return _animation!;
  }

  @override
  Widget buildPage(BuildContext context, Animation<double> animation, Animation<double> secondaryAnimation) {
    return CupertinoUserInterfaceLevel(
      data: CupertinoUserInterfaceLevelData.elevated,
      child: Builder(builder: builder),
    );
  }

  @override
  Widget buildTransitions(BuildContext context, Animation<double> animation, Animation<double> secondaryAnimation, Widget child) {
    return Align(
      alignment: Alignment.bottomCenter,
      child: FractionalTranslation(
        translation: _offsetTween.evaluate(_animation!),
        child: child,
      ),
    );
  }
}

/// Shows a modal iOS-style popup that slides up from the bottom of the screen.
///
/// Such a popup is an alternative to a menu or a dialog and prevents the user
/// from interacting with the rest of the app.
///
/// The `context` argument is used to look up the [Navigator] for the popup.
/// It is only used when the method is called. Its corresponding widget can be
/// safely removed from the tree before the popup is closed.
///
/// The `barrierColor` argument determines the [Color] of the barrier underneath
/// the popup. When unspecified, the barrier color defaults to a light opacity
/// black scrim based on iOS's dialog screens.
///
/// The `barrierDismissible` argument determines whether clicking outside the
/// popup results in dismissal. It is `true` by default.
///
/// The `useRootNavigator` argument is used to determine whether to push the
/// popup to the [Navigator] furthest from or nearest to the given `context`. It
/// is `false` by default.
///
/// The `semanticsDismissible` argument is used to determine whether the
/// semantics of the modal barrier are included in the semantics tree.
///
/// The `routeSettings` argument is used to provide [RouteSettings] to the
/// created Route.
///
/// The `builder` argument typically builds a [CupertinoActionSheet] widget.
/// Content below the widget is dimmed with a [ModalBarrier]. The widget built
/// by the `builder` does not share a context with the location that
/// `showCupertinoModalPopup` is originally called from. Use a
/// [StatefulBuilder] or a custom [StatefulWidget] if the widget needs to
/// update dynamically.
///
/// Returns a `Future` that resolves to the value that was passed to
/// [Navigator.pop] when the popup was closed.
///
/// ### State Restoration in Modals
///
/// Using this method will not enable state restoration for the modal. In order
/// to enable state restoration for a modal, use [Navigator.restorablePush]
/// or [Navigator.restorablePushNamed] with [CupertinoModalPopupRoute].
///
/// For more information about state restoration, see [RestorationManager].
///
/// {@tool sample --template=freeform}
///
/// This sample demonstrates how to create a restorable Cupertino modal route.
/// This is accomplished by enabling state restoration by specifying
/// [CupertinoApp.restorationScopeId] and using [Navigator.restorablePush] to
/// push [CupertinoModalPopupRoute] when the [CupertinoButton] is tapped.
///
/// {@macro flutter.widgets.RestorationManager}
///
/// ```dart imports
/// import 'package:flutter/cupertino.dart';
/// ```
///
/// ```dart
/// void main() {
///   runApp(MyApp());
/// }
///
/// class MyApp extends StatelessWidget {
///   @override
///   Widget build(BuildContext context) {
///     return CupertinoApp(
///       restorationScopeId: 'app',
///       home: MyHomePage(),
///     );
///   }
/// }
///
/// class MyHomePage extends StatelessWidget {
///   static Route _modalBuilder(BuildContext context, Object? arguments) {
///     return CupertinoModalPopupRoute(
///       builder: (BuildContext context) {
///         return CupertinoActionSheet(
///           title: const Text('Title'),
///           message: const Text('Message'),
///           actions: [
///             CupertinoActionSheetAction(
///               child: const Text('Action One'),
///               onPressed: () {
///                 Navigator.pop(context);
///               },
///             ),
///             CupertinoActionSheetAction(
///               child: const Text('Action Two'),
///               onPressed: () {
///                 Navigator.pop(context);
///               },
///             ),
///           ],
///         );
///       },
///     );
///   }
///
///   @override
///   Widget build(BuildContext context) {
///     return CupertinoPageScaffold(
///       navigationBar: const CupertinoNavigationBar(
///         middle: Text('Home'),
///       ),
///       child: Center(child: CupertinoButton(
///         onPressed: () {
///           Navigator.of(context).restorablePush(_modalBuilder);
///         },
///         child: const Text('Open Modal'),
///       )),
///     );
///   }
/// }
/// ```
///
/// {@end-tool}
///
/// See also:
///
///  * [CupertinoActionSheet], which is the widget usually returned by the
///    `builder` argument to [showCupertinoModalPopup].
///  * <https://developer.apple.com/design/human-interface-guidelines/ios/views/action-sheets/>
Future<T?> showCupertinoModalPopup<T>({
  required BuildContext context,
  required WidgetBuilder builder,
  ImageFilter? filter,
  Color barrierColor = kCupertinoModalBarrierColor,
  bool barrierDismissible = true,
  bool useRootNavigator = true,
  bool? semanticsDismissible,
  RouteSettings? routeSettings,
}) {
  assert(useRootNavigator != null);
  return Navigator.of(context, rootNavigator: useRootNavigator).push(
    CupertinoModalPopupRoute<T>(
      builder: builder,
      filter: filter,
      barrierColor: CupertinoDynamicColor.resolve(barrierColor, context),
      barrierDismissible: barrierDismissible,
      semanticsDismissible: semanticsDismissible,
      settings: routeSettings,
    ),
  );
}

// The curve and initial scale values were mostly eyeballed from iOS, however
// they reuse the same animation curve that was modeled after native page
// transitions.
final Animatable<double> _dialogScaleTween = Tween<double>(begin: 1.3, end: 1.0)
  .chain(CurveTween(curve: Curves.linearToEaseOut));

Widget _buildCupertinoDialogTransitions(BuildContext context, Animation<double> animation, Animation<double> secondaryAnimation, Widget child) {
  final CurvedAnimation fadeAnimation = CurvedAnimation(
    parent: animation,
    curve: Curves.easeInOut,
  );
  if (animation.status == AnimationStatus.reverse) {
    return FadeTransition(
      opacity: fadeAnimation,
      child: child,
    );
  }
  return FadeTransition(
    opacity: fadeAnimation,
    child: ScaleTransition(
      child: child,
      scale: animation.drive(_dialogScaleTween),
    ),
  );
}

/// Displays an iOS-style dialog above the current contents of the app, with
/// iOS-style entrance and exit animations, modal barrier color, and modal
/// barrier behavior (by default, the dialog is not dismissible with a tap on
/// the barrier).
///
/// This function takes a `builder` which typically builds a [CupertinoAlertDialog]
/// widget. Content below the dialog is dimmed with a [ModalBarrier]. The widget
/// returned by the `builder` does not share a context with the location that
/// `showCupertinoDialog` is originally called from. Use a [StatefulBuilder] or
/// a custom [StatefulWidget] if the dialog needs to update dynamically.
///
/// The `context` argument is used to look up the [Navigator] for the dialog.
/// It is only used when the method is called. Its corresponding widget can
/// be safely removed from the tree before the dialog is closed.
///
/// The `useRootNavigator` argument is used to determine whether to push the
/// dialog to the [Navigator] furthest from or nearest to the given `context`.
/// By default, `useRootNavigator` is `true` and the dialog route created by
/// this method is pushed to the root navigator.
///
/// If the application has multiple [Navigator] objects, it may be necessary to
/// call `Navigator.of(context, rootNavigator: true).pop(result)` to close the
/// dialog rather than just `Navigator.pop(context, result)`.
///
/// Returns a [Future] that resolves to the value (if any) that was passed to
/// [Navigator.pop] when the dialog was closed.
///
/// ### State Restoration in Dialogs
///
/// Using this method will not enable state restoration for the dialog. In order
/// to enable state restoration for a dialog, use [Navigator.restorablePush]
/// or [Navigator.restorablePushNamed] with [CupertinoDialogRoute].
///
/// For more information about state restoration, see [RestorationManager].
///
/// {@tool sample --template=freeform}
///
/// This sample demonstrates how to create a restorable Cupertino dialog. This is
/// accomplished by enabling state restoration by specifying
/// [CupertinoApp.restorationScopeId] and using [Navigator.restorablePush] to
/// push [CupertinoDialogRoute] when the [CupertinoButton] is tapped.
///
/// {@macro flutter.widgets.RestorationManager}
///
/// ```dart imports
/// import 'package:flutter/cupertino.dart';
/// ```
///
/// ```dart
/// void main() {
///   runApp(MyApp());
/// }
///
/// class MyApp extends StatelessWidget {
///   @override
///   Widget build(BuildContext context) {
///     return CupertinoApp(
///       restorationScopeId: 'app',
///       home: MyHomePage(),
///     );
///   }
/// }
///
/// class MyHomePage extends StatelessWidget {
///   static Route<Object?> _dialogBuilder(BuildContext context, Object? arguments) {
///     return CupertinoDialogRoute<void>(
///       context: context,
///       builder: (BuildContext context) {
///         return const CupertinoAlertDialog(
///           title: Text('Title'),
///           content: Text('Content'),
///           actions: <Widget>[
///             CupertinoDialogAction(child: Text('Yes')),
///             CupertinoDialogAction(child: Text('No')),
///           ],
///         );
///       },
///     );
///   }
///
///   @override
///   Widget build(BuildContext context) {
///     return CupertinoPageScaffold(
///       navigationBar: const CupertinoNavigationBar(
///         middle: Text('Home'),
///       ),
///       child: Center(child: CupertinoButton(
///         onPressed: () {
///           Navigator.of(context).restorablePush(_dialogBuilder);
///         },
///         child: const Text('Open Dialog'),
///       )),
///     );
///   }
/// }
/// ```
///
/// {@end-tool}
///
/// See also:
///
///  * [CupertinoAlertDialog], an iOS-style alert dialog.
///  * [showDialog], which displays a Material-style dialog.
///  * [showGeneralDialog], which allows for customization of the dialog popup.
///  * <https://developer.apple.com/ios/human-interface-guidelines/views/alerts/>
Future<T?> showCupertinoDialog<T>({
  required BuildContext context,
  required WidgetBuilder builder,
  String? barrierLabel,
  bool useRootNavigator = true,
  bool barrierDismissible = false,
  RouteSettings? routeSettings,
}) {
  assert(builder != null);
  assert(useRootNavigator != null);

  return Navigator.of(context, rootNavigator: useRootNavigator).push<T>(CupertinoDialogRoute<T>(
    builder: builder,
    context: context,
    barrierDismissible: barrierDismissible,
    barrierLabel: barrierLabel,
    barrierColor: CupertinoDynamicColor.resolve(kCupertinoModalBarrierColor, context),
    settings: routeSettings,
  ));
}

/// A dialog route that shows an iOS-style dialog.
///
/// It is used internally by [showCupertinoDialog] or can be directly pushed
/// onto the [Navigator] stack to enable state restoration. See
/// [showCupertinoDialog] for a state restoration app example.
///
/// This function takes a `builder` which typically builds a [Dialog] widget.
/// Content below the dialog is dimmed with a [ModalBarrier]. The widget
/// returned by the `builder` does not share a context with the location that
/// `showDialog` is originally called from. Use a [StatefulBuilder] or a
/// custom [StatefulWidget] if the dialog needs to update dynamically.
///
/// The `context` argument is used to look up
/// [CupertinoLocalizations.modalBarrierDismissLabel], which provides the
/// modal with a localized accessibility label that will be used for the
/// modal's barrier. However, a custom `barrierLabel` can be passed in as well.
///
/// The `barrierDismissible` argument is used to indicate whether tapping on the
/// barrier will dismiss the dialog. It is `true` by default and cannot be `null`.
///
/// The `barrierColor` argument is used to specify the color of the modal
/// barrier that darkens everything below the dialog. If `null`, then
/// [CupertinoDynamicColor.resolve] is used to compute the modal color.
///
/// The `settings` argument define the settings for this route. See
/// [RouteSettings] for details.
///
/// See also:
///
///  * [showCupertinoDialog], which is a way to display
///     an iOS-style dialog.
///  * [showGeneralDialog], which allows for customization of the dialog popup.
///  * [showDialog], which displays a Material dialog.
class CupertinoDialogRoute<T> extends RawDialogRoute<T> {
  /// A dialog route that shows an iOS-style dialog.
  CupertinoDialogRoute({
    required WidgetBuilder builder,
    required BuildContext context,
    bool barrierDismissible = true,
    Color? barrierColor,
    String? barrierLabel,
    // This transition duration was eyeballed comparing with iOS
    Duration transitionDuration = const Duration(milliseconds: 250),
    RouteTransitionsBuilder? transitionBuilder = _buildCupertinoDialogTransitions,
    RouteSettings? settings,
  }) : assert(barrierDismissible != null),
      super(
        pageBuilder: (BuildContext context, Animation<double> animation, Animation<double> secondaryAnimation) {
          return builder(context);
        },
        barrierDismissible: barrierDismissible,
        barrierLabel: barrierLabel ?? CupertinoLocalizations.of(context).modalBarrierDismissLabel,
        barrierColor: barrierColor ?? CupertinoDynamicColor.resolve(kCupertinoModalBarrierColor, context),
        transitionDuration: transitionDuration,
        transitionBuilder: transitionBuilder,
        settings: settings,
      );
}
